Heatstrip Indoor 2400 Watt

Switch and remote control with timer for Heatstrip

Make the operation of Heatstrip heaters easier with remote control. With the remote and switch, you are able to time, as well as turn on/off, all of your Heatstrip patio heaters every 1, 2 or 4 hours. The remote control has a range of 10 meters, making it easy to switch a heater on without having to move.

This remote control can be used for one or more Heatstrip patio heaters, as long as the total power usage does not exceed 16 amps and 220-240V.

Features

• Timer function: 1, 2, or 4 hours
• Can be used for multiple Heatstrip heating units
• Switch can be installed by a licensed electrician
• Must be installed a place without humidity

Included in delivery

• Remote controller
• Wall switch

Remote timer

The remote control allows the heating unit to be switched on/off, has a timer and 3 heat settings: high (100%), medium (70%) and low heat (40%). Additionally, it is possible to set a timer for your heater, allowing it to automatically turn on/off after 1, 2 or 4 hours.

Features

• Select heat settings between: High (100%), Medium (70%) and Low (40%).
• Automatic timer control e.g. 1, 2 or 4 hours.
• Can also be used for multiple heaters.
• Remote control included.
• Must be installed by a licensed electrician.

Included in delivery

• Remote controller
• Control panel for wall

Angle mounting brackets to Heatstrip Indoor

Angle mounting brackets to the Heatstrip Indoor models. The angle mounting brackets can be mounted on the wall or ceiling to bring the heater closer to the right position you need.

Features

• Angle of bracket is 45 degrees
• Screws are not included

Delivery includes

• x2 angle mounting brackets

Heatstrip Indoor 2400 Flush mount enclosure

This flush mount enclosure can be used with the Heatstrip Indoor 2400 model, specifically for the installation in ceilings. The mount makes it particular useful if you do not wish for the heater to take up space in the room, and instead integrate it smoothly into a ceiling.

It is recommended to clean the flush mount enclosure once every three months. This is due to potential filth and grime may accumulate in it. In case smoking takes place near the heater, it may be necessary to clean it more often. Cleaning it can be done with a wet cloth without the use of strong cleaning agents.

Features

• Designed for use indoors and outdoors
• Easy to install
• Designed for the Heatstrip Indoor 2400
• Size: 109 x 48.5 x 12 cm
• Screws for mounting not included

 Installation

When installing the flush mount enclosure, it is important that wires, insulation or other flammable materials are not in direct contact with it.

• Recommended mounting height: 2.1-2.4 metres
• Maximum mounting height: 2.7 metres

If the heater is installed at a height greater than the maximum, the efficiency of the heater can diminish.

The manual includes more elaborate descriptions when installing the flush mount enclosure.